Carex Pedal Exerciser Pedal Bike Trainer For Feet & Hands With Digital

We are selling this AS IS (no returns accepted) because we don't know if the LED/electronic portion still works or not, so we are selling it as if it does not work. But this will still work great as a pedal exerciser and the resistance knob also works great!
General Safety
Warning
Please ensure these
instructions are fully read and implemented. Failure
to do so may result in injury. Retain these instructions
in a safe place for future reference.
1.0 Intended Use
Designed for low impact rehabilitation and exercise
this Pedal Exerciser is NOT a suitable alternative to
a full size gym exercise bike or similar. It is ideal for
those with reduced mobility or those who wish to
complete a little gentle exercise. It incorporates a
digital display to enable users to view cycles
completed, RPM, duration and calories burned.
2.0 Safety Precautions
CAUTION! As friction is increased, or during
prolonged periods of vigorous exercise, the pedals
and housing may become warm to the touch. Stop
using the exerciser and allow to cool.
Do not attempt to stand whilst using the exerciser.
Ensure the exerciser is locked in the open position
prior to use.
Always place the exerciser on a flat, ‘non-slip’
surface. Never use on a wet floor or in a bathroom
environment.
Not suitable for use by children.
3.0 Unpacking
Remove packaging and check all parts carefully
before assembling the product. Do not assemble if
any parts are missing or appear damaged and
contact your supplier immediately.
4.0 Assembly
The product is supplied folded.
To unfold, gently pull the legs apart until the spring
pins click into place and lock the legs open, figure 1.
Check the legs are secure and place the
exerciser on the floor in front of your chair at a
comfortable distance.
5.0 Using the Exerciser
From a seated position, place your feet onto the
pedals and into the foot straps.
Adjust the foot straps as necessary.
5.1 To adjust the pedal resistance
Try a couple of pedal rotations to determine the
desired resistance.
User Instructions
Pedal Exerciser with Digital Display
M37352 Black & Silver (pictured) P01432 Black & Green
Foot Strap
Folding Leg
Pin Clip
Ring
Pedal
Resistance
Knob
Hinge
Digital Display
Figure 1 – Pedal Exerciser M37352
‘On Screen’
Arrow
Red ‘Mode’
Button
Figure 2 – Digital Display
To increase (harder) turn the pedal resistance knob
clockwise.
To decrease (easier) turn the pedal resistance knob
anti-clockwise.
5.2 Digital Display
The digital display can be set to show the following
functions:
• CNT (Counter) – number of complete pedal
rotations.
• TIME – duration of exercise.
• CAL (Calories) – number of calories burnt
during exercise.
• RPM (Reps per Minute) – calculates
repetitions per minute.
• SCAN – reviews the results of all functions.
5.2.1 Setting the Digital Display
Press and hold the red ‘mode’ button for 4 seconds,
Figure 2.
The display will flash through the different functions.
Once complete, press the red ‘mode’ button to scroll
through the functions. The ‘on screen’ arrow shows
which function is currently selected.
Please Note: if the display does not function as
described or does not appear, the battery needs
replacing. See section 7.1 for details.
5.3 To fold the Exerciser
Use the pin clip rings (one on each leg) to pull the
spring pins out.
Gently push the legs together to close the exerciser.
6.0 Cleaning
Wipe clean using a damp cloth. Take care when
wiping the digital display area.
Please check the suitability of the cleaning products
before use. Do not use abrasive cleaners or cloths as
these could permanently damage the surface and
invalidate any warranty.
Allow the product to dry thoroughly prior to use.
7.0 Maintenance
Inspect the product regularly for signs of wear,
pay particular attention to the condition of the
pedals and rotating mechanism.
Any suspected faults or damage should
immediately be reported to the supplier and the
product taken out of use.
7.1 Battery Replacement
To access the battery, insert a small, flat ended
screwdriver into the slots on both sides of the
digital display to release the clips.
Lift the display out of the housing. Take care not to
damage the connecting wires.
Replace the battery and re-insert the display.
Ensure the clips ‘click’ back into position securely.
8.0 Product Disposal
Product should be thoroughly cleaned prior to
disposal.
Product is manufactured from metal and plastic
and contains electrical components. Do not
dispose of this product in a regular disposal bin.
Product should be disposed of through Local
Authority Household Waste and Recycling
Centres or through Local Trade Waste Collectors.

Returns Accepted for this item if it's within 30 Days